Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Projects
    Failure
    Safety

    Vietnam landslides after extreme rainfall: slope stability lessons for engineers

    December 4, 2025|

    Reviewed by Tom Sullivan

    Vietnam landslides after extreme rainfall: slope stability lessons for engineers

    First reported on Geoengineer.org – News

    30 Second Briefing

    Prolonged storms in Vietnam have triggered one of the most severe sequences of rainfall-induced hazards in decades, with extensive flooding and more than a dozen landslides reported across Lam Dong province and neighbouring highland areas. Intense, long-duration rainfall on steep, highly weathered slopes has caused rapid slope failures, debris flows and road embankment collapses, cutting key mountain highways and isolating several rural communities. Geotechnical teams now face urgent stabilisation of saturated cut slopes, clearance of landslide debris from narrow carriageways, and reassessment of drainage and slope design criteria for future extreme events.

    Technical Brief

    • Failures involved shallow translational slides in colluvium and deeper rotational slips in highly weathered basalt.
    • Several debris flows mobilised channelised material, indicating progressive entrainment from saturated gullies and side slopes.
    • Road cut failures commonly initiated at over-steepened faces with minimal benching and inadequate surface drainage interception.
    • Geotechnical investigation is focusing on back-analysis of slip surfaces, residual shear strength of saprolite and piezometric response.
    • Emergency monitoring relies on visual patrols, temporary inclinometers at critical cuts and manual rainfall thresholds for road closures.
    • Short-term remediation includes rapid debris clearance, temporary shotcrete, toe berms and upslope diversion drains to reduce infiltration.

    Our Take

    Lam Dong sits in Vietnam’s Central Highlands, where steep terrain, lateritic soils and rapid urban expansion make rainfall-triggered slope failures a recurrent design issue for roads, hydropower and mining-related infrastructure, so operators will likely face tighter geotechnical and drainage requirements after this event.

    Within our 11 Hazards stories, Vietnam appears less frequently than countries such as India or Brazil, suggesting that this cluster of failures may prompt closer regional scrutiny of hillside development controls and early‑warning systems in the Central Highlands.

    For projects tagged under Safety and Failure in our database, post‑event investigations often lead to mandatory upgrades in slope monitoring and debris‑flow management; Lam Dong authorities and project owners can expect similar pressure to adopt higher design return periods for extreme rainfall in this region.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Melbourne sinkhole investigations: geotechnical lessons for tunnel project teams
    Hazards
    in 5 months

    Melbourne sinkhole investigations: geotechnical lessons for tunnel project teams

    A sinkhole roughly 8–10 m wide and several metres deep has opened on the AJ Burkitt Reserve sporting oval in Heidelberg, directly adjacent to the North East Link tunnel alignment in Melbourne’s northeast. Victorian Infrastructure Delivery Authority has confirmed the “surface hole” is in the vicinity of active tunnelling operations, leading to a work pause while engineers and emergency crews carry out geotechnical investigations and monitoring. No injuries or structural damage have been reported, but the area remains fully cordoned off pending cause determination and stability assessment.

    Spain retaining wall collapse derailment: failure lessons for rail engineers
    Hazards
    2 days ago

    Spain retaining wall collapse derailment: failure lessons for rail engineers

    A commuter train derailed in Gelida, near Barcelona, on 20 January after striking a collapsed retaining wall that had fallen onto the track, killing the driver and injuring 37 passengers. The incident, Spain’s second fatal rail accident in a week, occurred on a section of line with trackside earth-retaining structures, raising immediate questions over wall design, drainage, inspection frequency and slope stability under recent weather conditions. For civil and geotechnical engineers, failure mode identification and rapid condition assessment of similar retaining systems on active corridors will be a priority.

    Thailand crane collapse on passenger train: engineering lessons for rail projects
    Hazards
    10 days ago

    Thailand crane collapse on passenger train: engineering lessons for rail projects

    A construction crane collapsed onto a moving passenger train in northeastern Thailand on Wednesday morning, killing at least 32 people and injuring more than 60. The crane, operating on an adjacent construction site, failed and toppled across active railway tracks, striking multiple carriages at speed and causing extensive structural damage and derailment. Investigators are expected to focus on crane foundation design, ground conditions near the rail corridor, lift planning, exclusion zones and compliance with Thai standards for plant operating beside live transport infrastructure.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.