Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Safety
    Sustainability
    Projects

    Spill bunded pallets in mining: compliance and ground risk notes for engineers

    May 1, 2026|

    Reviewed by Joe Ashwell

    Spill bunded pallets in mining: compliance and ground risk notes for engineers

    First reported on Australian Mining

    30 Second Briefing

    Mining operators are increasingly using spill bunded pallets to contain fuels, lubricants and other hazardous liquids stored in workshops, laydown yards and processing areas, reducing the risk of unplanned releases to soil and drainage systems. Eco Pallets’ moulded polyethylene bunded units, shown in use at Tanafloc Australia, integrate forklift pockets, removable grates and corrosion‑resistant sumps sized to capture typical drum and IBC failure volumes. For geotechnical and environmental teams, this simplifies compliance with bunding requirements, reduces contaminated run‑off, and limits the footprint of lined or remediated ground.

    Technical Brief

    • Moulded polyethylene construction eliminates corrosion risk from saline spray, acidic reagents and fertiliser-based flocculants.
    • Fully sealed sumps avoid reliance on compacted soil bunds, reducing geotechnical verification and lining requirements.
    • Integrated forklift tine pockets allow safe relocation of full pallets without temporary de-bunding of drums.
    • Removable grates enable visual inspection of the sump floor for leaks, sludge build-up and structural damage.
    • Smooth, non-porous internal surfaces simplify decontamination and segregation of incompatible liquid residues.
    • Self-contained bunds reduce the footprint of concreted or HDPE-lined storage pads in constrained workshops and laydown yards.
    • Wider adoption on mines encourages standardised spill response procedures and clearer demarcation of hazardous liquid storage zones.

    Our Take

    Eco Pallets already features in our Environmental coverage through its Eco-Bin NV product, suggesting the company is positioning itself as a broader mine-site logistics and containment supplier rather than a niche pallet vendor in Australia.

    For operators in Australia, using third-party containment solutions from firms like Eco Pallets can streamline environmental audits and incident reporting, as regulators increasingly expect standardised, certifiable secondary containment rather than ad hoc site-built bunds.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Egis appoints Jamie Gleave EIA director: implications for UK infrastructure teams
    Environmental
    11 days ago

    Egis appoints Jamie Gleave EIA director: implications for UK infrastructure teams

    Egis has appointed Jamie Gleave as senior environmental impact assessment technical director for the UK, bringing more than 25 years’ experience across energy, transport and water infrastructure, including Wylfa Newydd nuclear power station and National Grid electricity transmission schemes. Gleave previously served as EIA technical director at AECOM, where he led its global EIA technical excellence practice and directed environmental work on the A428 Black Cat to Caxton Gibbet and M42 Junction 6 DCO schemes, acting as expert witness. He will work with UK–Ireland head of environment Afshan Rasheed to build Egis’s EIA, DCO and technical assurance capability.

    United Utilities £900k sewage fine: CSO and storm capacity lessons for engineers
    Environmental
    14 days ago

    United Utilities £900k sewage fine: CSO and storm capacity lessons for engineers

    United Utilities has been fined £900,000 after admitting five environmental permit breaches linked to a major raw sewage discharge on the Fylde coast in June 2023, following failures in its wastewater treatment and overflow control systems. The incident involved untreated effluent bypassing normal screening and settlement processes during storm conditions, leading to prolonged discharge through combined sewer overflows into coastal waters used for bathing. For civil and environmental engineers, the case reinforces regulatory scrutiny on stormwater storage capacity, real-time CSO monitoring, and resilience of ageing sewer networks under intense rainfall events.

    83% of Britain’s cities heat‑vulnerable: design implications for civil engineers
    Environmental
    17 days ago

    83% of Britain’s cities heat‑vulnerable: design implications for civil engineers

    Eighty-three per cent of Britain’s cities – 59 urban areas – are classed as highly vulnerable to urban heat in new spatial analysis by Ordnance Survey, the Met Office and 4 Earth Intelligence. The dataset combines OS building footprints, surface cover and green space with Met Office temperature projections to map local heat exposure at street-block scale. For civil and geotechnical engineers, this points to urgent retrofit of shading, permeable and high-albedo surfaces, and revised pavement and rail design to cope with more frequent extreme surface temperatures.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy