Geomechanics.io

  • Free Tools
Sign UpLog In
AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Research

    RS2 and CVBM spalling modelling: design takeaways for deep tunnel engineers

    February 27, 2026|

    Reviewed by Joe Ashwell

    RS2 and CVBM spalling modelling: design takeaways for deep tunnel engineers

    First reported on Geoengineer.org – News

    30 Second Briefing

    Numerical modelling of deep underground excavations using RS2 and the Confinement-Dependent Visco-Plastic Model (CVBM) is used to capture spalling in jointed rock masses where confinement drops and tangential stresses concentrate around excavation boundaries. The approach contrasts brittle spalling in massive, low-porosity rock with more ductile behaviour in highly jointed rock, explicitly representing joint orientation, spacing, and strength. For design, this enables more realistic prediction of depth of failure, damage zones, and support demand around tunnels and caverns at high stress ratios.

    Technical Brief

    • RS2 finite-element models couple CVBM with explicit joint elements to simulate stress–damage interaction.
    • Calibration uses laboratory triaxial tests and in situ stress measurements from deep underground case studies.
    • Joint networks are parameterised by measured spacing, persistence and orientation sets rather than homogenised anisotropy.
    • Time-dependent visco-plastic terms in CVBM capture delayed damage growth under sustained high tangential stress.
    • Mesh refinement around excavation perimeters is required to resolve thin spalling slabs and notch geometries.
    • Model outputs include evolving yielded zones, plastic strain localisation and predicted support load increments.
    • Application to design focuses on optimising excavation sequencing and support installation timing in high-stress drifts.
    • Scope is limited to hard, low-porosity rock masses; highly weathered or porous rocks are not addressed.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    BGS UK ground investigation data service: design and risk notes for engineers
    Geotechnical
    4 days ago

    BGS UK ground investigation data service: design and risk notes for engineers

    The British Geological Survey is advancing a national geotechnical data service to collate UK ground investigation records into a single, standardised digital platform for project teams. By aggregating borehole logs, in situ test results and laboratory data from multiple legacy sources, the system aims to give designers earlier visibility of variable strata, groundwater conditions and historical contamination. For geotechnical and civil engineers, this could reduce duplicate site investigations, refine ground models at concept stage and improve risk pricing for foundations, earthworks and underground structures.

    Amids South 93m bridge: design lessons on weak ground for geotechnical engineers
    Geotechnical
    6 days ago

    Amids South 93m bridge: design lessons on weak ground for geotechnical engineers

    A 93m-long bridge over the White Cart Water forms the core of the Amids South transport scheme, linking an existing industrial area to Paisley town centre and Glasgow Airport. Poor ground conditions along the river corridor drove a redesign of the substructure, with foundations and pier locations adjusted to avoid weak strata and reduce settlement risk. The scheme’s experience will interest geotechnical and bridge engineers dealing with soft alluvium and variable bearing capacity on constrained urban river crossings.

    Gary L. Seider P.E.: helical foundation design lessons for ground engineers
    Geotechnical
    8 days ago

    Gary L. Seider P.E.: helical foundation design lessons for ground engineers

    Gary L. Seider, P.E., is retiring after nearly 40 years with A.B. Chance, where he was instrumental in developing helical pile and anchor systems that became core to Hubbell’s foundation solutions portfolio after its 1994 acquisition. His work helped formalise design methodologies, installation torque–capacity correlations and training standards for contractors and engineers using screw anchors in transmission, distribution and commercial foundation projects. Seider’s legacy is a mature, codified helical foundation practice that many US geotechnical and structural engineers now treat as a routine design option.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Tunnelling

    Specialised solutions for tunnelling projects including grout mix design, hydrogeological analysis, and quality control.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.