Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Research
    Sustainability
    Product

    Adelaide-developed crusher: energy and CO₂ implications for plant designers

    March 13, 2026|

    Reviewed by Tom Sullivan

    Adelaide-developed crusher: energy and CO₂ implications for plant designers

    First reported on Australian Mining

    30 Second Briefing

    A new low-emission crushing technology developed at the University of Adelaide aims to cut comminution energy use by targeting ore breakage at natural grain boundaries rather than by conventional compressive crushing. Led by researcher Mark Drechsler, the lab-scale unit is being tested on copper and gold ores to quantify reductions in specific energy consumption and downstream grinding requirements. If pilot-scale trials confirm lower kWh/t and improved liberation, plant designers could downsize SAG/ball mills and reduce both capital cost and CO₂ intensity of mineral processing circuits.

    Technical Brief

    • If proven, similar grain-boundary–targeted devices could be tailored to complex, fine-grained ore bodies.

    Our Take

    South Australia features in relatively few of our 1116 Mining stories compared with the eastern states, so an Adelaide University-driven processing technology could give local operations a niche in low-footprint plant design rather than just bulk commodity output.

    Within the 840 tag-matched pieces on Research/Sustainability/Product, most items focus on incremental plant retrofits rather than new crushing concepts, suggesting this work may appeal to brownfield Australian sites looking for step-change energy or media savings without full circuit redesign.

    Australian university-led mining innovations in our database tend to move into commercial trials via METS companies rather than miners themselves, so any scale-up of this Adelaide-developed crusher in Australia is likely to hinge on a local OEM or engineering firm taking the IP to market.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 16 hours ago

    Fortescue Real Zero: 690 MW solar and 650 MWh BESS implications for mine power design

    Construction has commenced on Fortescue’s 690 MW Turner River solar farm in the Pilbara and a 650 MWh BYD-based BESS at Cloudbreak, the final major assets in its Real Zero decarbonisation plan for iron ore operations. The utility-scale PV and storage will feed Fortescue’s integrated Pilbara Energy Connect network, designed to displace large diesel and gas loads across multiple mines. For mine planners and electrical engineers, the build-out signals rapid scaling of high-penetration renewables and grid-forming storage in remote, weak-grid conditions.

    Meiteng’s full-size coal dry separation plant in Mongolia: design notes for mine engineers
    Mining
    about 16 hours ago

    Meiteng’s full-size coal dry separation plant in Mongolia: design notes for mine engineers

    Meiteng Technology’s full-size intelligent coal dry separation plant in Mongolia has run stably since October 2025, using its proprietary DCP Full-Size Coal Dry Separation Dream Plant system under harsh continental climate conditions. The installation applies fully dry, sensor-based coal separation without process water, reducing reliance on traditional dense medium circuits and associated tailings dams. For mine operators in arid or freezing regions, the project signals growing viability of large-scale dry beneficiation where water supply, freezing pipelines and slurry management constrain conventional plants.

    Forrestania–Newington gold acquisition: district-scale planning notes for mine teams
    Mining
    about 22 hours ago

    Forrestania–Newington gold acquisition: district-scale planning notes for mine teams

    Forrestania Resources has agreed to acquire 100 per cent of Midas Minerals’ Newington gold project in Western Australia, securing a package of granted mining and exploration tenements in a historically high-yield gold district. The transaction consolidates Forrestania’s Western Australian gold footprint around Newington, giving it full control over both existing mining leases and surrounding exploration ground. For geologists and mine planners, the deal creates a larger, contiguous tenure position that can support district-scale resource definition and staged development drilling.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.