Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Research
    Safety

    Solids flow basics: two-phase design lessons for bulk handling engineers

    September 2, 2026|

    Reviewed by Joe Ashwell

    Solids flow basics: two-phase design lessons for bulk handling engineers

    First reported on Australian Mining

    30 Second Briefing

    Two-phase flow between solid particles and interstitial air is shown to control how powders settle, discharge and move through hoppers, chutes and transfer points, with air pressure gradients often dominating behaviour in fine or aeratable materials. Jenike & Johanson’s microlearning session explains how phenomena such as flooding, ratholing and erratic discharge arise when air cannot escape freely, and why conventional single-phase flow assumptions fail. The content points engineers towards incorporating air permeation, deaeration and venting design into bulk solids handling calculations and equipment selection.

    Technical Brief

    • Conceptual models distinguish between coarse, fine and aeratable powders with differing air–permeation behaviours.
    • Safety emphasis is on preventing uncontrolled powder surges, blockages and unexpected flow stoppages during operation.
    • Guidance includes designing air escape paths, venting and deaeration features as explicit safety measures.
    • Training is framed as foundational knowledge for hazard analysis in bulk solids handling systems.
    • Scope is introductory; it outlines mechanisms and design levers but does not present new experimental data.

    Our Take

    Jenike & Johansen’s focus on solids flow fundamentals complements other Australian Mining coverage on dust and emissions control (for example the Nederman MikroPul piece), signalling that bulk material handling risks are being treated more holistically from chute design through to air quality management.

    For Australian operations moving towards more automated and AI-enabled plants (as highlighted in the recent digital ecosystems article involving Australian Mining), reliable solids flow behaviour is a prerequisite; poor hopper and transfer design can undermine the performance of otherwise sophisticated control systems.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    IperionX GenX HAMR titanium scale-up: process and energy insights for engineers
    Materials
    7 days ago

    IperionX GenX HAMR titanium scale-up: process and energy insights for engineers

    IperionX has validated continuous operation of its GenX hydrogen magnesiothermic reduction (HAMR) titanium furnace at its Virginia R&D facility, achieving a sixfold increase in throughput and a 75% cut in energy intensity versus its previous batch process. The commercial-scale system processed over 500 kg of recycled titanium powder in four continuous runs over 41 hours at roughly 12 kg/h, with all samples meeting oxygen specifications and showing substantially lower magnesium, hydrogen and power consumption at steady state. A second US Army SBIR contract allows project-specific defence orders up to a collective US$99 million, supporting scale-up of domestic titanium powder-to-part capacity in a market that currently has no US titanium sponge production despite aerospace demand above 31,000 t/y.

    Breedon cement business: leadership shift and sustainability focus for project teams
    Materials
    9 days ago

    Breedon cement business: leadership shift and sustainability focus for project teams

    Breedon has appointed Catherine Gibson as managing director for cement, products and surfacing solutions in Great Britain, adding her to Breedon GB CEO Mike Pearce’s leadership team at a time he describes as “challenging” but with “significant opportunities ahead”. Gibson previously sat on the Travis Perkins group executive committee, overseeing Keyline, its heavyside and civils brand, and other multi-site operations. With more than 25 years’ experience in UK building materials manufacturing and distribution, she is expected to focus on commercial performance and “sustainable growth” across Breedon’s heavy materials portfolio.

    Tokamak Energy HTS fusion magnets: Demo4 test insights for design engineers
    Materials
    15 days ago

    Tokamak Energy HTS fusion magnets: Demo4 test insights for design engineers

    Tokamak Energy has completed a 14‑month test campaign on Demo4, its high‑temperature superconducting (HTS) magnet testbed in Oxford, aimed at validating magnet performance for compact spherical tokamak fusion reactors. The Demo4 system is designed to operate HTS coils at cryogenic temperatures while subjecting them to high magnetic fields and mechanical loads representative of reactor conditions, a critical step for future fusion power plant infrastructure. Results will inform structural design, thermal management and lifecycle performance of full‑scale HTS magnet assemblies for grid‑scale fusion demonstrators.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.