Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Projects
    Product

    Sandvik’s Toro electrification strategy: design and power notes for mine engineers

    September 21, 2026|

    Reviewed by Joe Ashwell

    Sandvik’s Toro electrification strategy: design and power notes for mine engineers

    First reported on International Mining – News

    30 Second Briefing

    Sandvik used its Future of Mining 2026 event in Turku to set a new underground electrification strategy built around a “Toro standard” for its battery-electric load and haul fleet. Head of BEV Strategy Tommi Valkonen outlined plans to unify battery systems and controls across Toro-branded loaders and trucks, targeting faster battery swaps and simplified maintenance compared with today’s mixed platforms. The strategy signals tighter integration of BEV hardware, software and charging, with implications for mine power design, fleet standardisation and lifecycle cost modelling.

    Technical Brief

    • Event content contrasted Sandvik’s recent technology wins with acknowledged gaps in underground electrification performance and integration.
    • Operational feedback from existing BEV deployments was referenced as a key input to the revised electrification strategy.
    • Discussion extended to lifecycle support models, including overhaul planning and component standardisation across successive BEV product generations.

    Our Take

    Sandvik’s Toro® load and haul overhaul announced on 8 September 2026 suggests the electrification strategy discussed at Future of Mining 2026 is being anchored around a standardised underground truck and LHD platform, which should simplify fleet conversions and parts logistics for operators.

    The recent IEC 62443-4-1 Maturity Level 3 cybersecurity certification for Sandvik’s SICA platform indicates that any new Toro-based electric machines are likely to ship with a hardened digital control layer, which will matter for mines integrating battery fleets into site-wide automation networks.

    With Sandvik also locking in long-term tungsten concentrate offtake via Wolfram Bergbau und Hütten AG at Los Santos, the group is simultaneously shoring up critical mineral inputs and pushing an electrified equipment line, signalling a vertically aware strategy that ties OEM product roadmaps to EU-critical raw material security concerns.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Gold price slides on strong dollar: planning implications for mine projects
    Mining
    about 16 hours ago

    Gold price slides on strong dollar: planning implications for mine projects

    Gold prices slipped to a one-week low as spot gold fell 0.4% to $4,271.16/oz in New York and December futures eased 0.3% to $4,306 amid a stronger US dollar and expectations of more hawkish US Federal Reserve rate moves. The dollar hit a two-month high and US 10-year Treasury yields hovered near a 20-year peak, sharply raising the opportunity cost of holding non-yielding bullion. Oil gained about 1% on stalled US–Iran talks over the war, while spot silver dropped 1.8% to $63.29/oz, platinum 0.2% to $1,746.44, and palladium rose 0.5% to $1,266.40.

    OceanaGold Waihi expansion: design, throughput and tailings notes for engineers
    Mining
    about 16 hours ago

    OceanaGold Waihi expansion: design, throughput and tailings notes for engineers

    OceanaGold is weighing a 50% expansion of its Waihi plant to 1.2 Mt/y after Wharekirauponga drilling returned standout intercepts including 6.3 m at 97.2 g/t Au from 481.5 m in the East Graben vein and 8.5 m at 41.5 g/t from 399 m. The move would enable concurrent feed from Martha Underground and Wharekirauponga post‑2032, building on a 2024 plan outlining 1.6 Moz over 15 years and an initial 4.1 Mt reserve at 9.2 g/t. Underground development is advancing, with the Waihi North decline now 350 m, first vent shaft under construction, staged commissioning of a new water treatment plant, and early works on a new tailings storage facility due in Q4.

    Kinross Gold output cut and higher AISC: operational drivers and FCF lens for mine teams
    Mining
    about 17 hours ago

    Kinross Gold output cut and higher AISC: operational drivers and FCF lens for mine teams

    Kinross Gold has cut its 2026–27 production outlook by about 8% to 1.84–1.86 million attributable gold-equivalent oz. a year and raised 2024 AISC guidance to $1,850–$1,900/oz after winter storms, copper-rich sulphide ore and poor recoveries at La Coipa in Chile, plus weaker mining rates, grades and recoveries at Round Mountain Phase S in Nevada. The company is stockpiling high-copper material, studying a new flotation circuit for deeper sulphide mineralisation that may overlie a copper porphyry system, and using a smaller shovel at Round Mountain to cut dilution. Despite the operational hit and a Q3 output cut to about 425,000 oz., Kinross has lifted its 2026 shareholder return target to 50% of free cash flow and has already returned about $800 million this year, mainly via $655 million in buybacks.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Tunnelling

    Specialised solutions for tunnelling projects including grout mix design, hydrogeological analysis, and quality control.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.