Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Projects

    Rock & Alluvium’s 40 m CFA piles at Bow Green: design notes for London ground engineers

    May 1, 2026|

    Reviewed by Joe Ashwell

    Rock & Alluvium’s 40 m CFA piles at Bow Green: design notes for London ground engineers

    First reported on New Civil Engineer

    30 Second Briefing

    Rock & Alluvium, part of Van Elle, has installed its deepest continuous flight auger piles to date, reaching 40m, for the Bow Green development in East London. The record-depth CFA piles indicate challenging ground conditions and high load or settlement performance requirements typical of dense urban sites near the Thames. Contractors and designers may need to consider comparable pile lengths, rig capabilities and spoil management strategies for future high-rise or mixed-use schemes in similar London alluvial and made-ground profiles.

    Technical Brief

    • Concrete placement through hollow stem augers ensured full-depth shaft formation without open bore exposure to groundwater.

    Our Take

    Bow Green’s 40 m CFA piles come just as Strabag UK moves to acquire Van Elle, suggesting Rock & Alluvium’s deep-piling capability will likely be folded into a much larger European ground engineering platform with stronger balance-sheet support for complex London basements.

    In our geotechnical coverage, Van Elle has recently been repositioning away from lower-margin overseas rail work, so high-spec urban projects in London like Bow Green are likely to be increasingly important for margin recovery and for justifying Strabag’s acquisition premium.

    East London schemes with very deep CFA foundations typically face tight programme and noise constraints; demonstrating 40 m capability here will make Rock & Alluvium a more credible bidder for future high-rise or over-station developments in the capital where bored piling has traditionally dominated.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    BGS UK ground investigation data service: design and risk notes for engineers
    Geotechnical
    4 days ago

    BGS UK ground investigation data service: design and risk notes for engineers

    The British Geological Survey is advancing a national geotechnical data service to collate UK ground investigation records into a single, standardised digital platform for project teams. By aggregating borehole logs, in situ test results and laboratory data from multiple legacy sources, the system aims to give designers earlier visibility of variable strata, groundwater conditions and historical contamination. For geotechnical and civil engineers, this could reduce duplicate site investigations, refine ground models at concept stage and improve risk pricing for foundations, earthworks and underground structures.

    Amids South 93m bridge: design lessons on weak ground for geotechnical engineers
    Geotechnical
    6 days ago

    Amids South 93m bridge: design lessons on weak ground for geotechnical engineers

    A 93m-long bridge over the White Cart Water forms the core of the Amids South transport scheme, linking an existing industrial area to Paisley town centre and Glasgow Airport. Poor ground conditions along the river corridor drove a redesign of the substructure, with foundations and pier locations adjusted to avoid weak strata and reduce settlement risk. The scheme’s experience will interest geotechnical and bridge engineers dealing with soft alluvium and variable bearing capacity on constrained urban river crossings.

    Gary L. Seider P.E.: helical foundation design lessons for ground engineers
    Geotechnical
    8 days ago

    Gary L. Seider P.E.: helical foundation design lessons for ground engineers

    Gary L. Seider, P.E., is retiring after nearly 40 years with A.B. Chance, where he was instrumental in developing helical pile and anchor systems that became core to Hubbell’s foundation solutions portfolio after its 1994 acquisition. His work helped formalise design methodologies, installation torque–capacity correlations and training standards for contractors and engineers using screw anchors in transmission, distribution and commercial foundation projects. Seider’s legacy is a mature, codified helical foundation practice that many US geotechnical and structural engineers now treat as a routine design option.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.